Review of smok vape atomizer nord coils rpm80 mod trinity nfix kit

I got a vapeciga smok nord coils health cabins for the purposes of this review.

Smok g priv 3 colors:

  • chromium PRISM
  • Black
  • red
  • Gold Prism

Smok-g mod interlocking 3 specification

  • Size: 54 x 28 x 85mm
  • Chip: IQ-G Chipset
  • Operating mode: VW (Norm Soft, strong, Max) / TC (NI, IT, SS, TCR, heat) / Mode I
  • Power range: 1W-230W (VW) / 10-230W (TC)
  • Input voltage: 6.4V 8.4V-
  • Output voltage: 0.5V-8.2V
  • Battery: two 18650 cells
  • Cooking time: 0.001s
  • Loading port: Type C
  • Charging voltage: 5V
  • Charging Current: 2.0A
  • Standby current: <400uA
  • Resistance Range: 0.1ohm-2.5ohm (VW) / 0.05ohm-2.0ohm (TC)
  • Temperature: 200 ° F-600 ° F / 100 ° C-315 ° C
  • Display: 2.4 inch touch screen

Smok tfv16 tanks lite specifications:

  • Size: 24 x 58.5mm
  • Capacity: 5ml
  • Filling: Refill Top System
  • Material: Stainless steel
  • Coils: coil cone Lite Mesh TFV16, best: 60-75W; Double coil Lite Mesh TFV16 0.15ohm, Best: 60-90W
  • Topic: 510 gold plated wire

Vapeciga smok rpm80 pro replacement pods lite 16 is 24 mm in diameter and 58.5mm high this atomizer. With the atomizer is in the package, you will receive two tanks bubbles and you will receive a two coils.

Atomizer construction quality is good, the wire is smooth and everything is as it should be. Previous you can see atomizer “Smok” and the bottom of the atomizer can see the “Designed by Smok”.

With which spray nozzle and drip Smok standard spray pre-installed is not compatible with the 510 or 810 droplets tips would be a disadvantage for some people. Leakage is acceptable to use in my opinion.

This is the load atomizer and atomizer can see the buttons used to push the top cover. So when a button is pressed, you can push the envelope and see the fill hole. Fill a large gap and you will not have a problem to fill the tank. No leakage during filling of the tank.

This spray tank is equipped with glass bubbles and bubbles package pre-installed, you will receive a glass tank replacement. Capacity glass tank with a capacity of 5 ml of great bubbles in my opinion. If desired, you can buy in 2 ml atomizer release. I liked the glass bubble and I like the ability.

With the atomizer, you receive two coils. A coil is pre-installed, and the other is in the box. tfv16 Lite coil is integrated network coils and cone works best 60-75w coil, the coil resistance is 0.2ohm. Receive coils in the package is a double mesh tfv16 Lite coil and has the best endurance work and 0.15ohm 60-90w. You can easily replace the coil atomizer need is out of the coil and a pulse in another, very simple and easy. In the coil, you can see the engraved lines so you can tell me when to fill the tank, which is nice. The first time you use the reel should start with a few drops of liquid E and can put a coil in the tank and fill the tank.

In the air flow control dial, you can see that the air flow in both places. In the air flow control dial, you can see some details that helps adjust the air flow and how much will be adjusted, will be the same on the other. You can easily adjust the airflow into the atomizer.

How does it work? And my mind atomizer:

Atomizer build quiality I received was very good, everything worked fine and the correct cable. With the atomizer, you receive two rollers and two glass bubble tanks were really good in my opinion. Show new smok mag mod also receive a standard preinstalled drops and the spray nozzle is not compatible with the advice 510 or 810 drops would be an idiot.

Top filling with good and had no problems whatsoever, fill a large gap and can fill up quickly and easily. Capacity is very good in my opinion and I think a lot of capacity will 5ml. Using the spray, which received two rollers, one coil and other network dual bobbin thread. I tried the coil mesh and decent work, good taste, but I like the coil tank Tf better, and also provide a good flavor and excellent vapor production, this powerful steam. Given all very busy aerosol that can be treated.


  • It is compatible with the 510 or 810 drip tips


  • The build quality is good
  • facilitate the charging system
  • capacity 5 ml
  • Two glass bubble tanks
  • Two coils
  • The good taste
  • dense vapor and steam production
  • Easy to replace the coil
  • Easy to adjust the flow of air

Smok g priv 3 mod:

3 mod Smok g priv ate two 18650 and the object of this mod 1-230w formed. Mod dimensions of 54 mm x 28 mm x 85 mm. mod construction quality is very good and no complaints. I really like the design of mod, modern look very nice in my opinion, and you can buy this mod in 4 different colors. Mod does not have sharp edges and mod is very comfortable to use. You can also see some details about the mod, mod before, you can see “Smok” and behind the mod, you can see the “G-3 PRIV” with little information.

On the upper side of the mod, you can see the connecting thread here is good and I had no problem pin, silver and gold spring. this mod, you can use up to 25 mm diameter without false atomizers.

On the smok trinity alpha coils click in of the mod, you can see the battery cover and, as said this device is powered by two batteries 18650

The remains of the battery cover in place because the magnet and the remains of the situation thus does not play very well. At the bottom of the deck, you can see a small slot so you can pull nails. If the battery cover is removed, you can see the orientation of the battery in painting and also have a band here so you can make simple battery. When the battery is inserted into the mod and mod when it is not very good Sizzling stir.

Sub mod can see the ventilation slots and USB port c.
You can use the USB port for software updates and can be used to recharge the battery to charge additional device is balanced. As usual, I recommend recharge your batteries in an external charger.

On one side of the mod, you can see the shutter button. the shutter button on the device is very large and dislocation, which works very well. I like the shutter button and I think it is very convenient to use. At the top of the shutter button, you can see another button is used to turn on / off the screen and lock / unlock the screen.

On the front you can see the touch screen mod really, really big screen, 2.4inch screen size. I think this is a beautiful screen and the screen brightness is good.

To activate it you must press the shutter button 5 times and must do the same to turn it off. When the power supply mode activated will appear on the screen:

  • I can not
  • locking / unlocking
  • The battery indicator
  • hot
  • W
  • Time hojaldre
  • Left and right
  • coil resistance
  • V
  • blow

Thus, on the screen, we have all the necessary information and this is a big high definition screen with good brightness, because you can see everything that is good on the screen. The touch screen works very well and had no problems so far.
At the entrance to the menu, you can see:

  • Modus
  • My style
  • Hojaldre
  • Setting

When the selected mode, where you can see:

  • Vw
    Heat soft, standard, robust, max
  • Tc
    Ingredients: o, ti, ss

If you choose me mode, you can set up four different operating modes, you can select a rule, the heating fluid and can be written and NIC.
The choice of the breath of the breath, you can rearrange the tables and can set the maximum strength.
If you choose the settings you can see:

  • General (approximately factory reset, accessibility, food)
  • Chip (Info)
  • Theme (you can choose the color and screen timeout)
  • Access codes

How do these devices work and my thoughts:

G 3 PRIV is my opinion that another mod is very nice with smok nfix kit get code.

mod build quality is very good and everything is as it should be, feels very solid in the hand model. Mod has no sharp edges and easy to use, in my opinion. I like the shutter button and in my opinion, the trigger is very convenient to use, works well for now. This mod, you can use a diameter up to 25 mm without false atomizers. This mod is a fingerprint magnet will be a disadvantage for some people. USB port and supports mod c balances the charge that many would like, but as always, I recommend using an external charger. The display here is very good, is the size of the display of 2.4-inch touch screen and works very well, I have not had any problems so far. The screen brightness is also very nice and the screen, we have a lot of information. We also have some interesting options here, we have an access code and you can choose the color on the screen.
Above the shutter button is a button that allows you to lock / unlock the screen and enable / disable the screen. The battery cover is still perfectly in place and there was no play here, which is very good.
Mod now well and had no problem with this mod.
I really like this mod and mod works most of the time without any problems so far, so I can recommend this mod if you want to buy a mod touch screen.


  • fingerprint magnet


  • The quality of good mod building
  • I like the design model
  • comfortable to use
  • above the trigger button
  • I like the shutter button
  • 2.4 inch HD touch screen
  • Good display brightness
  • Lots of information on the screen
  • Easy to use
  • The touch screen works well
  • You can change the colors on the screen
  • Load Balancing
  • Battey cover keeps perfectly in place
  • My selection method
  • Access code
  • No ring
  • the strip so that you can easily remove the battery

You can buy here: smok vape atomizer

sourcemore thanks

Leave a comment

Your email address will not be published. Required fields are marked *